Milling Machine

From Make717 Wiki
Jump to navigation Jump to search

Grizzly G0759 Mill/Drill with DRO[edit | edit source]

Specs Use end mills up to 5/8" for roughing (NMT cuts of 0.025 inch) and up to 3/4" for finishing (NMT cuts of 0.005 inch)[edit | edit source]

Training - recommend you take the machining workshop at make717 unless you have prior experience[edit | edit source]

Software - none required[edit | edit source]

Material Sources[edit | edit source]

Recommended Settings by Material[edit | edit source]

References[edit | edit source]

Grizzly G0759 Mill/Drill with DRO