Workshops

From Make717 Wiki
Revision as of 18:33, 23 June 2019 by KyleHossler (talk | contribs) (KyleHossler moved page Areas, Workshops, & Clubs to Workshops without leaving a redirect: splitting information into separate user groups)
Jump to navigation Jump to search

Areas, Workshops, & Clubs

Areas refer to the major work areas in make717 are are usually centered around particular types of equipment. If you are looking to get started working at make717 checkout the descriptions of each area below. Workshops at make717 are organized events where members pay (above and beyond standard membership fees) to either learn a specific skill, create a defined project, or develop a useful skill. Orientation events are free sessions that are usually required to allow a member to use a piece of equipment. Clubs are something that we might be developing in the future.

This page will concentrate on the organization of each area, the orientation and safety procedures required to use the equipment, and the learning opportunities and interactions available.

Areas


Computer and Networking

Computer & Networking Group

Position Member(s)
Coordinator: Member name
Trainers Members' Names
Maintenance Team Members' Names
Members Chris Tourville, Joseph Thum, Gregg Martell
Safety Committee Representative Member Name

3D Printing

3D Printing & Design Group

Position Member(s)
Coordinator: Wes and Sam Bischel
Trainers Wes and Sam Bischel
Maintenance Team Wes and Sam Bischel, Nate Behe, Michael Dennis,Dylan Roslan
Members Dylan Roslan, Nick Traini, Dean Youndt, Christian Kegel, Austin Weidler, Wes & Sam Bischel, Wade Whitmoyer
Safety Committee Representative Marsha Bischel

3D Printing Equipment Safety

There are burn and pull/crush hazards involved. When it gets cold please be aware of long selves and hanging jewelry, beards/hair and other possible jerk hazards. Please also don't touch the hot end when it is hot. Common sense.

3D Printing Equipment Required Orientations

3d printing orientation. These are scheduled monthly but can be requested sooner.

Design Software (2D, 3D, Vector, & Bitmap)

Design Software Group

Position Member(s)
Coordinator: Member name
Trainers Members' Names
Maintenance Team Members' Names
Members Austin Weidler, Gregg Martell
Safety Committee Representative Member Name

Electronics, Coding, and Wearables

Electronics, Coding, & Wearables Group

Position Member(s)
Coordinator: Member name
Trainers Members' Names
Maintenance Team Members' Names
Members Bruce Schreiner, Nick Traini, Austin Weidler, Joseph Thum, Wade Whitmoyer
Safety Committee Representative Member Name

Electronics, Coding, & Wearables Equipment Safety

Electronics, Coding, & Wearables Equipment Required Orientations

Woodworking

Woodworking Group

Position Member(s)
Coordinator: Member name
Trainers Members' Names
Maintenance Team Members' Names
Members Emery DeWitt, Joseph Thum, Gregg Martell, Wade Whitmoyer
Safety Committee Representative Member Name

Woodworking Equipment Safety

Woodworking Equipment Required Orientations

Crafts (Vinyl Cutter, Eggbot, . . .)

Crafts Group

Position Member(s)
Coordinator: Member name
Trainers Members' Names
Maintenance Team Members' Names
Members Nathan Behe, Gregg Martell
Safety Committee Representative Member Name

Crafts Equipment Safety

Crafts Equipment Required Orientations

Power and Hand Tools

Power & Hand Tools Group

Position Member(s)
Coordinator: Member name
Trainers Members' Names
Maintenance Team Members' Names
Members Members' Names
Safety Committee Representative Member Name

Power & Hand Tools Equipment Safety

Power & Hand Tools Equipment Required Orientations

Workshops

Model Machining Workshop

Build Your Own 3D Printer Workshop

Beginning Python Programming with Raspberry Pi Workshop

Edge-lit Sign Making Workshop

Edge-lit Sign Making Workshop Page

Clubs

Clubs have not been established at this point at make717 but it is possible this term might be applied to some type or organization meant to accomplish things sometime in the future. Stay tuned to see how this develops!